Technical data

RZ56 Storage Expansion Box 67
MA-X0964-89
LED FLEX CABLE
CONNECTOR
LOCKING PINS
BEZEL CLIPS
FRAME SLOTS
DRIVE MODULE
29-XXXXX-XX
HDA (WITH FRAME)
29-XXXXX-XX
2
1
Figure 6–10 RZ56 Drive Bezel Removal
2. Unplug the LED flex cable from J11.
3. Hold the sides of the bezel with the palms of your hands with your
fingers resting on the front of the bezel. Next, position your thumbs
on the back of the bezel above the locking pins.
4. Carefully apply outward pressure to the bezel with your thumbs until
the two bezel locking pins clear the holes in the frame. Note that the
bezel must flex about 1/8 inch to clear the pins.
5. While the bezel is flexed, slide it upward until movement stops (about
3/8 inch). This frees the upper bezel clips from the upper frame slots.
6. Push the bezel away from the drive. This frees the lower bezel clips
from the lower frame slots and releases the bezel.