Technical data

44 VAXstation 3100 (Model 38) System
Power Cable
Panhead Screws (3)
Locating Post
Battery Cable
Panhead Screws (5)
Locating Post
MLO-002916
MA-X0871-89
Figure 4–16 Removing the System Module
8. Remove the eight panhead screws from the system module as shown
in (Figure 4–16).
9. Remove the system module by carefully popping up the two front
corners and off the two locating posts.
10. Slide a small screwdriver under each end of the Ethernet ID ROM
and carefully lift the ends until you can remove the ROM from the
system module. (Figure 4–17) shows the Ethernet ID ROM.