Technical data

42 VAXstation 3100 (Model 38) System
4. If you have paired memory modules, remove the two E-clips and
separate the 8- or 16-megabyte module from the 4- or 12-megabyte
module below it (Figure 4–14).
MLO-002913
8 or 16 Megabyte
"E" Clips (2)
4 or 12 Megabyte
Memory Module
Memory Module
MA-X0869-89
Figure 4–14 Separating Paired Memory Modules
5. To replace the new memory module, reverse the procedures in Section
4.10.
4.11 System Module Removal
To remove a system module:
1. Disconnect all cables from the back of the system box.
2. Remove the system box cover (Section 4.3).
3. Remove the drive plate (Section 4.7).
4. Remove the memory module(s) from the system (Section 4.10).
5. Remove the graphics coprocessor module (if installed) from the system
(Section 4.9).
6. Disconnect the MSC cable from the system module (Figure 4–15).