Technical data

VAXstation 3100 (Model 38) System 41
4.10 Memory Module Removal
To remove a memory module:
1. Remove the system box cover (Section 4.3).
2. Remove the drive plate (Section 4.7).
3. Whether you have one or two memory modules, the removal procedure
is the same. Lift the module(s) from the four standoffs and the two
connectors under the module by grasping the module(s) close to the
connectors (Figure 4–13).
MLO-002912
Memory Module
Connectors Underneath
Module
MA-X0868-89
Standoffs
Standoff
Standoffs
Figure 4–13 Removing Memory Modules