Technical data

32 VAXstation 3100 (Model 38) System
4.5 TZ30 Tape Drive Removal
To remove a TZ30 tape drive:
1. Remove the system box cover (Section 4.3).
2. Disconnect the internal power cable, pn 17–02440–01, and the
SCSI signal cable, pn 17–02439–01, from the back of the tape drive
(Figure 4–6).
Remove SCSI
Signal Cable
Remove Internal
Power Cable
Press Lever
Down
Slide Drive Over
and Remove
TZ30 Tape
SCSI Mass Storage
Controller Module
MLO-002910
Drive Plate Lever
Internal Power Cable
SCSI Signal Cable
Drive
MA-X0866-89
Figure 4–6 Removing a TZ30 Tape Drive