Technical data

30 VAXstation 3100 (Model 38) System
2. Disconnect the internal power cable, pn 17–02440–01, and the SCSI
signal cable, pn 17–02439–01, from the back of the disk that is being
removed (Figure 4–4).
Remove SCSI
Signal Cable
Remove Internal
Power Cable
Press Lever
Down
Slide Drive Over
and Remove
RZ23 Hard Disk
SCSI Mass Storage
Controller Module
MLO-002911
Drive Plate Lever
Internal Power Cable
SCSI Signal Cable
MA-X0867-89
Figure 4–4 Removing an RZ22/RZ23 Disk Drive
3. Locate the drive plate lever under the disk drive that is being
removed.