Technical data

4 Testing

Table 1–1 (Cont.) Power-Up and Self-Test Commands

Test Mnemonics Device

T 3 Option module (not available)

T 2 Option module (not available)

T 1 NI Ethernet circuits

Example 1–3 shows an example of the conﬁguration table.

>>> TEST 50

KA42-B V1.0

ID 08-00-2B-02-CF-A4

MONO 0000.0001

CLK 0000.0001

NVR 0000.0001

DZ 0000.0001

00000001 00000001 00000001 00000001 00000001 000012A0

MEM 0008.0001

00800000

MM 0000.0001

FP 0000.0001

IT 0000.0001

SCSI-A 0808.0001 V1.0

FFFFFF05 FFFFFF05 FFFFFF05 00000001 FFFFFF05 FFFFFF05 FFFFFF03

SCSI-B 3C3C.0001 V1.0

FFFFFF05 FFFFFF05 00000001 00000001 05000001 01000001 FFFFFF03

SYS 0000.0000

8PLN 0000.0001 V1.0

NI 0000.0001

>>>

Example 1–3 Conﬁguration Table (T 50)

Any code in the conﬁguration table other than 0000.0001 on the MONO,

DZ, MM, FP, IT, or SYS devices indicates a hard error and the system

module must be replaced for proper operation of the system. The other

devices such as CLK, NVR, MEM, SCSI-A, SCSI-B, and NI may have a

code other than (0000.0001) and may still operate normally.