Specifications

In the following sample display, the SCSI connector in base
slot 5 has an RZ55 hard disk drive assigned to unit 1, an
RRD40 compact disc drive assigned to unit 4, and a TK50Z
tape drive assigned to unit 6.
>>cnfg 5
5: PMAZ-AA DEC T5.2e TCF0 (SCSI = 7)
---------------------------------------------------
DEV PID VID REV SCSI DEV
===== ================== ========== ====== ========
rz1 RZ55 (C) DEC DEC 0700 DIR
rz4 RRD40 (C) DEC DEC 0700 CD-ROM
tz6 SEQ
>>
If a device you installed fails to appear in the configuration
display,
Be sure that device has not been assigned an ID
number that is the same as that assigned to some
other device on the SCSI connector.
Be sure the device in question is connected to an active
power source.
Be sure all cables are securely connected and a
terminator has been installed in the empty connector
on the last box.
If the device still fails to appear in the display, contact your
system manager or your Digital service representative.
5–16 External Storage Options: Hard Disk, Floppy Disk, Tape, and Optical Compact Disc Drives