Specifications

Turn On Expansion Boxes and Check Configuration Displays
1. Turn on each expansion box and then the system unit by
pressing the 1 on the on/off switches on the system unit,
the BA42 storage expansion box, the TK50Z tape drive
expansion box, and the RRD40 optical compact disc drive
expansion box. Press and release the on/off switch on the
TLZ04 tape drive.
Type test at the console prompt and press Return.
As the system performs the power-up self-test, the subtest
IDs flicker in the lower-left corner of your screen.
When the system unit has completed the power-up self-test
successfully, a display similar to the following appears on
the screen.
KN02-AA V5.3d
>>
2. Check your configuration displays to be sure your system
recognizes each device you have connected.
At the console prompt (>>), type cnfg, press the space bar,
and then type one of the numbers listed here. Then press
Return.
For the SCSI connector that comes with the basic
workstation configuration, type 5.
For a SCSI connector in option slot 0, type 0.
For a SCSI connector in option slot 1, type 1.
For a SCSI connector in option slot 2, type 2.
External Storage Options: Hard Disk, Floppy Disk, Tape, and Optical Compact Disc Drives 5–15