Specifications

5. Attach the free end of the system-unit-to-expansion-box
cable to one of the connectors on the back of the first
expansion box.
a. Press the two wire brackets on the expansion box
connector away from the connector.
b. Position the cable connector so the Digital logo is on
top.
If the box you are connecting is a TK50Z tape drive,
slide the cable connector up between the handle and
the back of the box.
c. Push the cable connector into the expansion box
connector as far as it will go.
d. Press the two wire brackets firmly against the sides of
the cable connector until they click into the grooves on
the connector, as shown in Figure 5-7.
5–10 External Storage Options: Hard Disk, Floppy Disk, Tape, and Optical Compact Disc Drives