Specifications

Set the SCSI Switches for Each Device
Each expansion device connected to a SCSI connector must be
assigned a SCSI ID number for that connector. ID numbers
available for expansion devices are 0 through 6. These numbers
are assigned by setting switches provided on the expansion
boxes or, in the case of floppy disk and tape drives inside a
BA42 expansion box, on the drives themselves.
To set the switches on the BA42 storage expansion box, you
must first remove the plastic cover that protects the switches.
To do so, press up on the tab on the bottom of the cover until
you can pull the cover away from the box.
WSE2I063
Press up on the tab
on the bottom of the
SCSI switch cover
until you can pull the
cover away from the box.
Figure 5-4. Removing the SCSI-switch cover from the BA42 storage
expansion box
5–6 External Storage Options: Hard Disk, Floppy Disk, Tape, and Optical Compact Disc Drives