Specifications

7. Locate the memory module in the highest-numbered slot
and pull that module straight up until it is free of its
connector, as shown in Figure 4-8.
To remove more than one memory module, remove the
second module from the next highest-numbered slot, the
third from the third highest, and so on.
8. Replace the metal bracket and tighten the screws.
9. Remove the antistatic wrist strap and replace the cover on
the system unit.
10. Turn on the system unit by pressing the 1 on the on/off
switch on the back of the unit.
WSE2O042
Memory module
Antistatic wrist strap
0
1
2
3
4
5
6
7
1
2
3
4
5
6
Figure 4-8. Removing a memory module
Internal Hardware Options 4–11