Specifications

3. Push the ribbed portion of the terminated T-connector onto
the ThinWire Ethernet connector, which is located above
the Ethernet icon on the back of the system unit.
4. Twist the ribbed portion of the T-connector from side to side
until you can push it onto the system unit connector.
5. Twist the ribbed portion of the T-connector to your right
until it locks into place on the system unit connector.
WSE2I025
Ethernet icon
Terminated
T-connector
W 359
Hz 50-60
A 7.9/4.2
V~100-120/220-240
V~220-240 A 1.7
V~100-120 A 3.0
0
1
2
PMAZ-A
PMAD-A
3
2
PMAG-C
System unit
ThinWire connector
Figure 3-2. Terminating ThinWire Ethernet
Ethernet Hardware for the Basic Workstation 3–3