Specifications

If you have a gray-scale monitor
The signal cable on the free end of the video cable assembly
connects with the round connector on the back of the
monitor.
a. Firmly push the connector on the signal cable onto the
round connector on the back of the monitor.
You may have to wiggle the cable connector back and
forth a little to get it to slip onto the monitor connector.
b. Twist the cable connector to your right until it slides
forward and locks into place.
c. Use the plastic screw that came with the gray-scale
video cable assembly to hold the connector block in
place on the monitor as shown in Figure 2-14.
WSE2I084
Cable mounting detail
Connector block
Video cable connector
Figure 2-14. Connecting a video cable assembly to a VR262 19-inch
gray-scale monitor
2–18 System Unit, Monitor, Keyboard, and Mouse or Tablet