Specifications

Table 2-2. Controls, Connectors, and Indicator Lights on the Monitors
Item
1
Function
Power indicator light Glows green when the monitor receives
power from a wall outlet or the system unit.
Contrast control Allows you to adjust the intensity of the
display on the screen.
Brightness control Allows you to adjust the brightness of the
background on the screen.
Vertical static convergence
(V-STAT) control
Adjusts the red and blue horizontal lines
in a color display so they converge with the
green horizontal line in the display.
Horizontal static convergence
(H-STAT) control
Adjusts the red and blue vertical lines in
a color display so they converge with the
green vertical line in the display.
Vertical centering (V-CENT)
control
Adjusts the picture position upward or
downward on the screen.
RGB signal cable connectors Allow video signals to flow between the
monitor and the system unit.
Fuse Protects the monitor from electrical damage.
Voltage switch Lets you match the monitor’s voltage to the
voltage at your power source.
Power connector Allows power to flow from the system unit
or from a wall outlet or a power strip to the
monitor.
On/off switch Turns the monitor on and off.
Degauss button Lets you clear color distortion caused by
outside magnetic interference.
High-scan/low-scan Not used with the DECstation 5000 Model
200 workstation.
1
Not every item appears on every monitor.
2–12 System Unit, Monitor, Keyboard, and Mouse or Tablet