Specifications

Dismantling Your Workstation
1. Follow the procedures for turning off your workstation
given in Chapter 8 of this guide.
2. Unplug all power cords from their power sources.
3. Disconnect any optional peripheral devices from the
system unit, and if you have more than one expansion box,
disconnect them from each other.
4. Disconnect the monitor, the mouse or tablet, and the
keyboard from the system unit.
5. Disconnect the keyboard and the mouse or tablet from the
connector block on the keyboard-mouse cable.
6. If you are on a network, disconnect your Ethernet cable
from the connector on the system unit.
Caution: Disconnecting the Ethernet cable at the network instead
of at the system unit interrupts network performance.
11–2 Moving the DECstation 5000 Model 200 Workstation