Specifications

Table 9-9 (Cont.). Solutions to Basic Hardware Problems
Problem Solution
You cannot log on
to the network, and
you have already
ruled out software
problems.
If you are using ThickWire Ethernet, follow these steps:
1. Shut down your worksystem software, if necessary, and
turn off the system unit.
2. Be sure your ThickWire connector is firmly attached to
the ThickWire connector on the system unit.
3. Turn on the system unit.
If you are using ThinWire Ethernet, follow these steps:
1. Shut down your worksystem software, if necessary, and
turn off the system unit.
2. Be sure your ThinWire cable connector(s) and/or
terminator are firmly attached to the ThinWire
T-connector.
3. Be sure the ThinWire T-connector is correctly attached to
the ThinWire connector on the system unit.
4. Turn on the system unit.
(continued on next page)
9–20 Troubleshooting