Specifications

The Power-Up Self-Test
When you turn on your workstation, the system unit runs the
power-up self-test.
As the system performs the subtests that make up this test, the
subtest IDs flicker in the lower-left corner of the screen.
When the system unit has completed the power-up self-test
successfully, and if your workstation language has been set, a
display similar to the following appears on the screen:
KN02-AA V5.3d
>>
If your workstation language needs to be set, a list of available
languages appears on the screen. Turn to page 8-7 for
information about setting the language.
If an error message appears on your screen, or if the self-test
does not complete and no display appears on the screen, turn to
‘‘Reading Self-Test Results’’ on page 9-4.
The System Self-Test
When the system unit has completed the power-up self-test, the
workstation language has been set if necessary, and the console
prompt (>>) has appeared on the screen, type test and press
Return.
This causes the workstation to run the system self-test. As the
system performs the subtests that make up the system self-test,
the subtest being performed is briefly identified in a display in
the lower-left corner of your screen.
When all subtests have been completed successfully, the console
prompt (>>) appears in the lower-left corner of the screen.
Troubleshooting 9–3