Specifications

Using Self-Tests
Self-tests consist of a number of subtests that check the parts
of your workstation and tell you whether they are working
correctly.
You can run a self-test in one of the following ways:
By turning on your workstation
By typing test at the console prompt (>>) and pressing
Return
By pressing the reset button on the back of the system unit
WSE2O010
Reset button
On/off switch
W 359
Hz 50-60
A 7.9/4.2
V~100-120/220-240
V~220-240 A 1.7
V~100-120 A 3.0
0
1
2
PMAG-C
PMAD-A
3
2
Figure 9-1. The reset button on the system unit
9–2 Troubleshooting