Specifications

The information inside the parentheses at the end of each
display line shows what kind of option module is present in
that slot.
CX shows that you have a color frame buffer.
A color frame buffer module can be installed in any of the
three option slots.
In the display in Figure 8-4, a color frame buffer module is
present in option slot 0.
PX shows that you have a 2D graphics accelerator module.
A 2D graphics accelerator module can be installed in option
slot 0 or 1.
DA: PXG shows that you have a low 3D graphics accelerator
module.
A low 3D graphics accelerator module can be installed in
option slots 0 and 1 and is displayed in option slot 1. In
this case, option slot 0 would not be represented in the
display.
EA: PXG shows that you have a mid 3D graphics accelerator
module.
A mid 3D graphics accelerator module can be installed in
option slots 0 and 1 and is displayed in option slot 1. In
this case, option slot 0 would not be represented in the
display.
FA: PXG_T shows that you have a high 3D graphics
accelerator module.
A high 3D graphics accelerator module is installed in all
three option slots and is displayed as option slot 1. In this
case, neither option slot 0 nor option slot 2 would appear in
the display.
SCSI shows that you have a SCSI module.
A SCSI module is always present in base slot 5. In
addition, a SCSI option module can be installed in any
of the three option slots.
In the display in Figure 8-4, a SCSI option module is
present in option slot 1.
Starting and Testing Workstation Hardware 8–11