Specifications

If your system unit fails to turn on
If nothing happens when you turn on the system unit, turn it
off and check to be sure that
Both power cords are connected properly and the power
strip, if there is one, is plugged in and turned on.
There is power at power outlets.
Monitor and system unit power switches are set to the on
position.
If the system unit still fails to work, turn to Chapter 9 of this
guide for troubleshooting instructions.
If nothing happens when you use the keyboard
Disconnect the keyboard cable from its connector on the
connector block. Then reconnect the cable and try the keyboard
again.
If the keyboard still fails to work, press the reset button on the
back of the system unit.
If the keyboard continues to fail, turn to Chapter 9 of this guide
for troubleshooting instructions.
8–8 Starting and Testing Workstation Hardware