Specifications

When the system unit turns on, the following things happen:
A green indicator light glows on the front of the system
unit.
The system unit runs the power-up self-test.
If necessary, the workstation prompts you to set your
keyboard language.
As the system performs the subtests that make up the power-up
self-test, the subtest IDs flicker in the lower-left corner of the
screen.
If your workstation language has already been set, a display
similar to the following appears on your screen when the
system unit has completed the power-up self-test successfully:
KN02-AA V5.3d
>>
If the workstation language needs to be set, the following
language menu appears on the screen:
1) Dansk 9) Français (Suisse Romande)
2) Deutsch 10) Italiano
3) Deutsch (Schweiz) 11) Nederlands
4) English 12) Norsk
5) English (British/Irish) 13) Portûgues
6) Español 14) Suomi
7) Français 15) Svenska
8) Français (Canadien) 16) Vlaams
(1..16): _
At the language prompt [(1..16): _], type the number
displayed to the left of the language you want to use. Then
press Return.
The console prompt (>>) appears when your language is set.
If the display that appears on your screen after the power-up
self-test has been completed is neither a language menu nor
similar to the preceding successful self-test display, turn to
Chapter 9 of this guide for an explanation of error messages
and troubleshooting instructions.
Starting and Testing Workstation Hardware 8–7