Specifications

To turn on a 19-inch VRT19 color monitor, a 19-inch
VR262 gray-scale monitor, or a 16-inch VR297 color
monitor
Set the on/off switch on the front of the monitor to the on
position by pressing the 1 on the switch.
The indicator light on the front of the monitor glows green, and
the screen lights up.
To turn on a 19-inch VR299 color monitor
Press and release the on/off switch on the front of the monitor.
The indicator light on the front of the monitor glows green, and
the screen lights up.
If your monitor fails to turn on
If you are using a monitor power cord instead of a monitor-to-
system-unit power cord, the indicator light turns on but the
screen remains dark until the system unit is turned on also.
If you are using a monitor-to-system-unit power cord, and
the green indicator light turns on but the screen stays dark,
be sure that
– The contrast and brightness controls located by their
icons on the monitor are turned all the way on.
– The system unit is turned on.
If the screen remains dark, turn to Chapter 9 of this guide
for troubleshooting instructions.
8–4 Starting and Testing Workstation Hardware