Specifications

9. Plug the power cord into the power source.
10. Turn on the device according to the instructions that came
with it.
11. Turn on the system unit by pressing the 1 on the on/off
switch on the back of the unit or by turning on the power
strip.
The system unit performs its power-up self-test and
displays the console prompt (>>) when all the subtests are
completed successfully.
12. At the console prompt (>>), type test and press Return.
This causes the workstation to run the system self-test. As
the system performs the subtests that make up the system
self-test, the subtest being performed is briefly identified in
a display in the lower-left corner of your screen.
When all tests have been completed successfully, the
console prompt (>>) appears in the lower-left corner of your
screen.
If a subtest fails, turn to Chapter 9 of this guide for
troubleshooting instructions. The console prompt (>>)
reappears in the lower-left corner of your screen.
7–8 External Communication Options: Printers, Plotters, Modems, and Console Terminals