Specifications

Installing a Device That Has a Telephone-Jack Type of
Connector
1. Follow the instructions that came with your device to
perform these tasks:
Be sure the device is turned off.
Set up the device and attach the cable and power cord
that came with it.
Set the proper baud rate and control settings.
2. If necessary, follow the instructions that came with your
worksystem software to shut down the software.
3. Turn off the system unit by pressing the 0 on the on/off
switch on the back of the unit or by turning off your power
strip if you are using one.
4. Find the communications connector adapter that came with
your shipment.
WSE2I066
Front Back
Figure 7-3. A communications connector adapter
7–6 External Communication Options: Printers, Plotters, Modems, and Console Terminals