Specifications

For a workstation within a ThinWire cable segment
1. If necessary, follow the instructions that came with your
worksystem software to shut down the software.
2. Turn off the system unit by pressing the 0 on the on/off
switch on the back of the unit.
3. Remove both terminators from the ThinWire T-connector
located in base slot 6 of the system unit.
Turn the terminator on your right toward you and the
terminator on your left away from you until you can pull
them away from the T-connector.
WSE2I032
T-connector
Terminator
Terminator
Figure 6-5. Removing the terminators from the T-connector
Optional Network Connections: ThinWire and ThickWire Ethernet 6–7