Specifications

For a workstation at the end of a ThinWire cable segment
1. If necessary, follow the instructions that came with your
worksystem software to shut down the software.
2. Turn off the system unit by pressing the 0 on the on/off
switch on the back of the unit.
3. Remove one terminator from the ThinWire T-connector in
base slot 6 of the system unit.
Turn the terminator on your left away from you or the
terminator on your right toward you until you can pull the
terminator away from the T-connector.
WSE2I030
T-connector
Terminator
Terminator
Figure 6-3. Removing a terminator from the T-connector
Optional Network Connections: ThinWire and ThickWire Ethernet 6–5