Specifications

Finding Your Ethernet Station Address
If you plan to use your workstation on a network or networks,
you need to learn the Ethernet station address for each
Ethernet connector on the system unit.
To learn the Ethernet station address for base slot 6 and any
option slots that contain Ethernet connectors, type cnfg at the
console prompt (>>) and press Return.
A display similar to the following appears on your screen.
>>CNFG
7: KN02-AA DEC T5.2a TCF0 ( 24 MB)
6: PMAD-AA DEC T5.2a TCF0 (enet: 08-00-2b-0f-45-72)
5: PMAZ-AA DEC T5.2a TCF0 (SCSI = 7)
2: PMAD-AA DEC X5.1f TCF0 (enet: 08-00-2b-0f-45-31)
1: PMAZ-AA DEC X5.1e TCF0 (SCSI = 7)
0: PMAG-BA DEC T5.2a TCF0 (CX -- d=8)
>>
Figure 6-2. Sample Ethernet station addresses
In the sample display, lines that contain enet: in parenthesis
at the end of the line show Ethernet station addresses. The
number of the base or option slot containing that Ethernet
connector appears at the beginning of the line.
The display in Figure 6-2 shows two Ethernet station addresses:
The line that starts with 6: contains the first Ethernet
address: 08-00-2b-0f-45-72. The number 6 at the
beginning of this line shows that the Ethernet connector
with this address is in base slot 6, the location of the
ThinWire Ethernet connector.
The second Ethernet address appears on the line that starts
with 2:. The Ethernet connector with this address — 08-
00-2b-0f-45-31
— is in option slot 2. Ethernet modules in
option slots are always ThickWire modules.
Optional Network Connections: ThinWire and ThickWire Ethernet 6–3