Service manual

Self-Tests 79
B.2.4 TEST 4:
high word : multicast filter bit number being tested
#^x4002 ; init failed
#^x4004 ; TX failed
#^x4006 ; packet received
#^x4008 ; bad filter value
#^x400A ; init failed
#^x400C ; failed loopback
#^x400E ; init failed
#^x4010 ; failed loopback
B.2.5 TEST 5:
#^x5002 ; init failed
#^x5004 ; OWN not toggled
#^x5006 ; no RTRY error
#^x5008 ; TX turned off
#^x500A ; init failed
#^x500C ; TX failed
#^x500E ; no rcv MISS
B.2.6 TEST 6:
#^x6002 ; init failed
#^x6004 ; loopback failed
#^x6006 ; bad CSR0
#^x6008 ; no NI interrupt
#^x600A ; init failed
#^x600C ; loopback failed
#^x600E ; wrong # of int’s.
#^x6010 ; NI int. bits set
B.2.7 TEST 7:
#^x6002 ; init failed
#^x6004 ; loopback failed
#^x6006 ; bad CSR0
#^x6008 ; no NI interrupt
#^x600A ; init failed
#^x600C ; loopback failed
#^x600E ; wrong # of int’s.
#^x6010 ; NI int. bits set