Service manual

VAXstation 3100 (Model 76) System 57
5. Disconnect the SCSI terminator or the external SCSI cable from
the SCSI port on the back panel. If your system has a terminator
installed, you must remove the terminator access door before you can
remove the terminator. The access door can be released by applying
upward pressure on the bottom until the door hinges upward (refer to
Figure 4–17). At this point the whole door can be removed. Remove
the terminator (refer to Figure 4–18).
MA-1353-90.DG
SCSI Terminator
SCSI Terminator
Access Door
SCSI Terminator
Access Door
Figure 4–17 External SCSI Access Panel