Service manual

VAXstation 3100 (Model 76) System 53
MA-1324-90.DG
Down (On)
Up (Off)
123
1
2
3
Switches Positions:
SCSI ID 5
Figure 4–14 SCSI ID Switch Location
3. Remove the two SCSI signal cables by spreading the tabs and pulling
the connectors out as shown in Figure 4–15.
4. Remove the power cable by pulling the connector out.
5. Remove the six Phillips-head screws on the SCSI/FDI adapter board.
6. Reverse this removal procedure to install the new SCSI/FDI adapter.