Service manual

Utilities 21
>>> TEST 76
>>>
ScsFlpFmtter
PV_SCS_FMT_CHN
PV_SCS_FMT_ID
(0=SCSIA \ 1=SCSIB)? 0 Enter SCSI bus.
Enter SCSI ID of RX23.
Enter a 1 for yes, 0 for no.
Formatting diskette.
RX23 format checked OK.
Diskette is formatted
successfully.
(0,1,2,3,4,5,6,7)? 5
PV_SCS_FMT_RUsure (1/0)? 1
PV_SCS_FMTing...
PV_SCS_FMT_CHKpass..........
PV_SCS_FMT_SUCC
Example 3–1 Formatting an RX23 Diskette
3.1.1 Diskette Formatter Messages
Table 3–2 lists all the formatter messages and gives an explanation for
each.
Table 3–2 Diskette Formatter Messages
Formatter Message Explanation
PV_SCS_FMT_CHKpass A check pass is being done on the diskette.
PV_SCS_FMT_CHN Enter the SCSI bus that is connected to
the RX23/SCSI adapter assembly. Enter
0 for the SCSI-A bus or enter 1 for the
SCSI-B bus.
PV_SCS_FMTing The RX23 diskette is being formatted.
PV_SCS_FMT_RUsure The formatter uses this question as a
safety check. Enter 1 for yes if you want
to format the diskette, otherwise, enter
any character other than 1 to abort the
formatter.