Service manual
Self-Tests 93
Offset Size Description
200D.0a00 - SCSI registers at end of test_scsi_interrupts
200D.0b00 - SCSI registers at end of test_scsi_reg_function
200D.0c00 - SCSI registers at end of test_scsi_reg_addr
200D.0d00 - SCSI registers at end of test_disk_buffer
200D.0e00 - SCSI registers at end of test_scsi_bus_free
200D.0f00 - SCSI registers at start of test
B.6 SCSI-A (test 7)
These tests, codes, and registers are the same as those shown for test 6.
B.7 IT (test 8)
The interval timer power-up self-test has one longword for status
information in the following format:
IT 0000.000X
where X is one of the status or error codes listed in the following table:
Code Status Deļ¬nition
1 Status: Success
2 Error: Fatal error