Installation guide

Does the drive appear in
the cnfg display now?
WS33P014
Yes
cnfgType
Type init
End
No
(continued)
Yes
Start
slot number.
Press Return.
Does the drive appear in
the cnfg display?
Check that all cables are
connected to the drive and
that there is a terminator on
the last external drive in the
bus.
Make sure each drive in the
SCSI bus has a unique ID
from 0 to 6.
slot number.
Press Return.
No
Replace the drive.
Figure 2-15 Troubleshooting SCSI controllers
and devices, 1 of 2
2–32 TROUBLESHOOTING TOOLS