Installation guide

No
Replace the drive.
cnfg 3 display?
missing from the cnfg or
Is a SCSI device
Yes
WS33P009
Press Return.
init
End
Yes
B
(Continued)
A
(Continued)
Replace the cable from the
SCSI controller to the first
device.
No
Replace the SCSI controller.
Make sure the power is on
and all cables are
connected properly.
Change the SCSI ID for the
missing device to an
unused ID between 0 and 6.
Type slot number.
End
Yes
Does the device
appear in the cnfg or cnfg3
display now?
No
Is the SCSI controller or
device still missing from
the display?
Figure 2-12 When hardware does not
appear in the cnfg display,
2of3
TROUBLESHOOTING TOOLS 2–29