Installation guide

WS33P026
End
setenv console s.
No
No
Yes
Replace the graphics
module.
A
Is a VT320
terminal available?
Yes
setenv console *
Remove all graphics modules.
Connect the VT320 to the
system unit. Turn on the
VT320 and the system unit.
On the VT320 keyboard,
type
Turn on the system unit
power.
Troubleshoot according to
the error messages that
appear on the monitor.
Turn off the system unit
power. Reinstall the graphics
module(s). Turn on the
system unit power.
Troubleshoot according to
the error messages that
appear on the VT320.
Replace FRUs as appropriate.
On the VT320 keyboard,
type
to re-enable the normal
monitor.
Is a TURBOchannel
graphics module installed?
LEDs = 0011 1011,
0010 1011,
0001 1011, or
0000 1011
Figure 2-7 When the LED display is
0011 1011, 0010 1011, 0001 1011, or
0000 1011, 1 of 2
2–24 TROUBLESHOOTING TOOLS