Installation guide

WS33P007
No
Yes
Insert two good memory
modules into slot 0 and at
least 8 Mbytes of memory
total in the system.
Does the power-up
self-test still stop and the
LEDs display 0011 0110?
Replace any modules that
report an error after the
memory test.
Replace the system module.
End
Replace the remaining
memory modules one
pair at a time. After each
pair, type
slot number. Press Return.
and the
End
See
"Memory Test Error
Messages".
3/mem
LEDs = 0011 0110
Figure 2-5 When the LED display is
0011 0110
2–22 TROUBLESHOOTING TOOLS