Installation guide

Table 2-6 SCC transmit and receive test
codes and descriptions
(code: description) Meaning
1: LnN tx bfr not
empty. status=xx
System could not write a
single character because
the transmit buffer was
not empty. The error
occurred on line N. xx is
the contents of SCC read
register 0.
2: LnN char not rcvd.
status=xx
Expected CHAR AVAIL
signal not received. The
error occurred on line N.
xx is the contents of SCC
read register 0.
3: LnN expctd=xx,
rcvd=yy, status=zz
The character received
was different from the
character transmitted.
The error occurred
on line N. xx is the
transmitted value. yy is
the received value. zz is
the contents of SCC read
register 0.
4: LnN Rx err. errs=xx Receiving character
in FIFO reported
an error. The error
occurred on line N. xx
is the associated input
character FIFO error
bits.
TROUBLESHOOTING TOOLS 2–13