Installation guide

t command
To run a single test from the console prompt type
t [-l] slot_number/test_name [arg1] [...] [argn]
t is the test command.
-l The test repeats until you press
Ctrl-c or reset the system with the
init command or by cycling power.
slot_number Replace with the slot number of
the module to be tested.
test_name Replace with the name of the test
to be run.
arg1...argn Specify individual test conditions.
Table 2-2 lists the tests for the base system
modules. To display a list of tests for an option
module from the console prompt (>>), type
t slot_number/?
2–4 TROUBLESHOOTING TOOLS