Technical data

Mass Storage Drive Removal, Continued
The following table lists the hard disk drive SCSI jumper
settings.
Table 6–1 Hard Disk Drive SCSI Jumper Settings
SCSI ID P1 P2 P3 Comment
0 Out Out Out
1 In Out Out
2 Out In Out
3 In In Out
4 Out Out In
5 In Out In
6 Out In In Usually reserved for SCSI controller
7 In In In
The following table lists the standard ID numbers for the SCSI
devices.
Table 6–2 Standard IDs for SCSI Devices
ID Number Device Type Example
0 to 3 Hard disk RZ2xL, RZ2x, RZ5x
4 CDROM RRD42
5 Tape or floppy RX26, TLZ04, TZK10
6 Reserved for the
system
KA49 SCSI Controller
7 Any drive Second tape or floppy
Continued on next page
6–13