Technical data

Updating Firmware On Tape, Continued
>>> BOOT MKA500
2..
Bootfile: KA49_V41_EZ
-MKA500
1..0..
FEPROM BLASTING PROGRAM
blasting in V4.1...
---CAUTION---
EXECUTING THIS PROGRAM WILL CHANGE YOUR CURRENT ROM ---
Do you really want to continue [Y/N] ? : Y
DO NOT ATTEMPT TO INTERRUPT PROGRAM EXECUTION!
DOING SO MAY RESULT IN LOSS OF OPERABLE STATE!
The program will take at most several minutes.
starting uniform_program...
byte 00070000 has been written with 0’s...
byte 00060000 has been written with 0’s...
byte 00050000 has been written with 0’s...
byte 00040000 has been written with 0’s...
byte 00030000 has been written with 0’s...
byte 00020000 has been written with 0’s...
byte 00010000 has been written with 0’s...
byte 00000000 has been written with 0’s...
starting erase...
byte 00070000 has been erased...
byte 00060000 has been erased...
byte 00050000 has been erased...
byte 00040000 has been erased...
byte 00030000 has been erased...
byte 00020000 has been erased...
byte 00010000 has been erased...
byte 00000000 has been erased...
starting program...
byte 00070000 has been reprogrammed...
byte 00060000 has been reprogrammed...
byte 00050000 has been reprogrammed...
byte 00040000 has been reprogrammed...
byte 00030000 has been reprogrammed...
byte 00020000 has been reprogrammed...
byte 00010000 has been reprogrammed...
byte 00000000 has been reprogrammed...
FEPROM Programming successful
>>>
Continued on next page
5–100