Technical data

FEPROM Firmware Update, Continued

Updating

Firmware on

Disk

This table describes how to update ﬁrmware on disk.

Step Action

1 Create a top level directory on the disk.

CREATE/DIR

DKA100:[FIRMWARE]

2 Copy the ﬁrmware update savesets to the directory.

Use the following command:

$ COPY <filename>:[FIRMWARE]*.*

3 On the client system, enter this command at the console

prompt:

b/100 dka100

The system then prompts you for the name of the ﬁle.

Continued on next page

5–96