Technical data

Product Fault Management, Continued
NOTE
If footprints are being generated for more than one
memory module, especially if they all have the same
bit in error, the processor module, backplane, or other
component could be the cause.
NOTE
An uncorrectable ECC error due to a ‘‘disown write’’,
results in a CRD entry similar to those for correctable
ECC errors. The FOOTPRINT longword for this entry
contains the message ‘‘Uncorrectable ECC errors
due to disown write’’. The failing module should be
replaced for this error.
VAX/VMS SYSTEM ERROR REPORT COMPILED 21-NOV-1991 16:55:58
PAGE: 1.
***************************** ENTRY 4. *******************************
ERROR SEQUENCE 2. LOGGED ON: SID 13000202
DATE/TIME 1-JUL-1992 13:55:10.68 SYS_TYPE 04010002
SYSTEM UPTIME: 0 DAYS 00:04:40
SCS NODE: VAX/VMS T5.5-1X2
CORRECTABLE MEMORY ERROR KA49 CPU Microcode Rev # 2. CONSOLE FW
REV# 0.1
Standard Microcode Patch Patch Rev # 1.
REVISION 00000000
SYSTAT 00000000
FLAGS 00000008
memory sbe reduction subpacket
MEMORY SBE REDUCTION SUBPACKET
LOGGING REASON 00000001
NORMAL REPORT
PAGE MAPOUT CNT 00000001
MEMCON 00010101
MEMORY CONFIGURATION:
MS44-AA Simm Memory Module
(4MB) Loc 0A
MS44-AA Simm Memory Module
(4MB) Loc 0B
MS44-AA Simm Memory Module
(4MB) Loc 0C
MS44-AA Simm Memory Module
(4MB) Loc 0D
_Total memory = 16MB
_sets enabled = 00000001
MEMORY ERROR STATUS:
SIMM MEMORY MODULES: LOCATIONS
0A & 0B
Set = 0(X)
Bank = B
VALID ENTRY CNT 00000001
1.
CURRENT ENTRY 00000001
1.
Continued on next page
5–79