Technical data

Utilities, Continued
Step Action Comment
1 Enter T/UTIL 2 The LCSPX main utility
routine displays a list of the
available utilities (as shown in
Figure 5–7) and then displays
the prompt SPX_util>>>.
2 Enter the utility
number that you want
to run.
In Figure 5–7, utility 8 is
selected.
3 Press
Return
at the
prompt to exit the
utility.
4 Press the space bar to
return to the utility
menu after the utility
has run.
Control returns to the console
if an invalid utility number is
entered. (Anything other than
a string beginning with 0-9, or
A-D).
5 Press
Ctrl C
or press
the spacebar then
Return
after the test
has completed, to exit
the utility.
Continued on next page
5–44