Technical data

Displaying System Configuration
Configuration
Commands
The Model 90 firmware provides two configuration commands,
SHOW DEVICE and SHOW CONFIG.
SHOW DEVICE determines what type of mass storage devices
are included in the system.
SHOW CONFIG determines the overall system configuration.
SHOW DEVICE
The SHOW DEVICE command determines the presence of storage
devices, such as a hard disk, diskette drives, or other drives.
Syntax:
>>> SHOW DEVICE
Return
The system displays information similar to that shown next.
Example:
>>> SHOW DEVICE
VMS/VMB ADDR DEVTYPE NUMBYTES RM/FX WP DEVNAM REV
------- ---- ------- -------- ----- -- ------ ---
EZA0 08-00-2B-17-EA-FD
DKA0 A/0/0 DISK 209.81 MB FX RZ24 211B
DKA100 A/1/0 DISK 426.25 MB FX RZ25 0700
DKA200 A/2/0 RODISK .......... RM WP RRD42 1.1A
..HostID.. A/6 INITR
A/DEVICE_ID/LOGICAL_ID
The LOGICAL ID is always 0.
Column Meaning
VMS/VMB The operating system interpretation of what
the device is. For example, with a VMS
operating system, a fixed media drive with
SCSI is interpreted as ID of 3 DKA300.
Continued on next page
5–8