User`s guide

EK–KZPBA–UG. B01 ix
About This Guide
This chapter tells you what this User’s Guide does, identifies the audience, describes the
structure and contents (chapter-by-chapter), lists the conventions used in the guide, and
tells you how to get support and services from DIGITAL.
Introduction
This guide describes how to install and configure the KZPBA–CA PCI-to-Ultra
SCSI Host Adapter, and how to use the software utilities to modify the
parameters in the flash EEROM located on the module.
Visit our Web Site for the Latest Information
Check out our web site for the latest drivers, technical tips, and documentation.
We can be found in the technical area of our web page:
http://www.storage.digital.com/
Audience
This guide is intended for the end-user who is installing the KZPBA–CA Host
Adapter into a host computer.
Related Documentation
The user should be familiar with the documentation for the host computer and for
the SCSI devices that are mounted internally or externally and are to be
connected to the module.
Organization
This guide contains the following:
•
Chapter 1:
Overview
— Provides an overview of the KZPBA–CA PCI-to-
Ultra SCSI Host Adapter. The KZPBA–CA is an ultra wide single-ended
host adapter.
•
Chapter 2:
Configuration Guidelines
— Provides information about valid
configurations, cables and adapters, a description of single-ended SCSI, and
sample configurations.