User`s guide

KZPBA-CA PCI-to-UltraSCSI Host Adapter
6–4 EK–KZPBA–UG. B01
Table 6–2 SCSI Device Troubleshooting Table (Continued)
Symptom Probable Cause Corrective Action
SCSI device . . . (con't) SCSI bus not terminated
properly.
Total len
g
th of SCSI bus
too long.
Ensure each end of the bus is
terminated.
Ensure devices in the middle
of the bus are not terminated.
Check total len
g
th of SCSI bus
as follows:
Ultra Single-ended
,
1.5 meters, maximum.
Defective SCSI device. Replace SCSI device.
6.4 Boot Sequence Problems
Table 6–3 describes possible problems during the boot sequence, specifies their
probable cause, and suggests corrective actions.
NOTE
For the DIGITAL UNIX and DIGITAL OpenVMS
operating systems, obtain the correct device
name as described in Section 3.7. For the Win-
dows NT operating system, obtain the correct de-
vice name as described in Section 3.6.