User`s guide

KZPBA-CA PCI-to-UltraSCSI Host Adapter
5–8 EK–KZPBA–UG. B01
3. When the utility finishes polling the SCSI IDs, it displays a list of the SCSI
device settings, similar to the list shown in Figure 5
−
4.
4. Change settings as needed. Press the
Esc
key to exit.
5.3.4 Restoring Default Settings
Use
Restore Default Settings
to restore SCSI device settings to their default
states. To restore the default settings, do these steps:
1. Use the arrow keys to move the cursor to
Configuration Settings
on the
Fast!Util
main menu and press the
Enter
key. The
Configuration Settings
menu appears as shown in Figure 5
−
2.
2. Use the arrow keys to move the cursor to the
Restore Default Settings
option
on the
Configuration Settings
menu and press the
Enter
key. The utility
displays the message:
Checking SCSI ID #
.
3. When the utility finishes polling the SCSI IDs, it displays a list of SCSI
device settings, similar to the list shown in Figure 5
−
4.
4. Change settings as needed and press the
Esc
key to exit.
5.4 Scanning SCSI Bus
Use the
Scan SCSI Bus
option to determine what devices exist on the SCSI bus.
To Scan the SCSI bus, follow these steps:
1. Use the arrow keys to move the cursor to
Scan SCSI Bus
option on the
Fast!Util
main menu and press the
Enter
key.
The utility displays the message:
Checking SCSI ID #
.
2. When the utility finishes polling the SCSI IDs, it displays a list of SCSI
devices at each of the SCSI IDs.