User`s guide

Chapter 5. QLogic Fast!Util
EK–KZPBA–UG. B01 5–5
Table 5−2 Host Adapter Settings
Settin
g
Ran
g
e Default
Host Adapter Enabled or Disabled Enabled
Host Adapter BIOS Enabled or Disabled Enabled
Host Adapter SCSI ID 0-7 (Fast!SCSI PCI Ultra-
N)
0-15 (Fast!SCSI PCI Ultra-
W and Fast!SCSI PCI
Ultra-D)
7
PCI bus DMA burst Enabled or Disabled Enabled
SCSI bus reset Enabled or Disabled Enabled
SCSI bus reset dela
y
0-15 seconds 5 seconds
SCSI termination Auto, Enabled, Disabled,
Hi
g
h onl
y
Auto
5.3.2 Changing SCSI Device Settings
If you need to change SCSI device settings from their defaults, follow these
steps:
1. Use the arrow keys to move the cursor to
Configuration Settings
on the
Fast!Util
main menu and press the
Enter
key. The
Configuration Settings
menu appears as shown in Figure 5
−
2.
2. Use the arrow keys to move the cursor to the
SCSI Device Settings
option on
the
Configuration Settings
menu and press the
Enter
key. The SCSI device
settings appear as shown in Figure 5
−
4.