User`s guide

KZPBA-CA PCI-to-UltraSCSI Host Adapter
5–4 EK–KZPBA–UG. B01
Figure 5−3 Host Adapter Settings
QLogic Fast! UTIL Version 1.27
Selected Adapter
Adapter Type I/O Address
PCI Ultra-W 8000
Host Adapter Settings
BIOS Address: CC000
BIOS Revision: 4.15
Interrupt Level: 5
Host Adapter: Enabled
Host Adapter BIOS: Enabled
Host Adapter SCSI ID: 7
PCI bus DMA burst: Enabled
SCSI bus reset: Enabled
SCSI bus reset delay: 5 seconds
SCSI termination: Auto
Use <Arrow keys> and <Enter> to change settings, <Esc> to exit
2. Use the arrow keys to select any of the Host Adapter settings you can move
to (you can only move to settings that you can change). Press the Enter key
to toggle between options or to display a list of options. Press the Enter key
again to select an option from a list. Table 5
−
2 shows the host adapter
setting defaults.
3. Press the Esc key to return to the Configuration Settings menu when you
complete the host adapter settings.